HM120B288
Dimensions
Max feed force Fx as a function of axis speed v
Deflection w over unsupported axis length LAW under payload
| Dimensions | |||
|---|---|---|---|
| Lc | Total carriage length | 305 | mm |
| B | Switch position | 71,5 | mm |
| C | Switch position | 166,5 | mm |
| LT | Total length | LT = LST + 689 | mm |
| Load data | |||
|---|---|---|---|
| Fydynmax | Ultimate force | 12165 | N |
| Fzdynmax | Ultimate force | 12165 | N |
| Mxdynmax | Maximum torque | 110 | Nm |
| Mydynmax | Maximum torque | 900 | Nm |
| Mzdynmax | Maximum torque | 900 | Nm |
| z | Upper carriage edge to guiding centre | 77 | mm |
| General technical data | |||
|---|---|---|---|
| vmax | Max. speed | 5 | m/s |
| amax | Max. acceleration | 30 | m/s² |
| Fx_max | Max. feed force | 4000 | N |
| Ma_max | Max. drive torque | 183 | Nm |
| Load capacity | 120 | kg | |
| Maximum total length | 6220 | mm | |
| Repeatability | ± 0.05 | mm | |
| Ix | Area moment of inertia of profile cross-section | 6791541 | mm⁴ |
| Iy | Area moment of inertia of profile cross-section | 9553626 | mm⁴ |
| Guiding | |||
|---|---|---|---|
| Guiding type | QHW30CC | ||
| Cdyn | Dynamic load rating | 58260 | N |
| C0 | Static load rating | 66340 | N |
| Drive | |||
|---|---|---|---|
| Drive element | B60HTD8 | ||
| Feed constant | 288 | mm/U | |
| Effective diameter of toothed belt pulley | 91,67 | mm | |
| Mechanical properties | |||
|---|---|---|---|
| Carriage mass | 5,29 | kg | |
| Mass at 0 stroke | 23,44 | kg | |
| Mass per 1 m stroke | 20,77 | kg/m | |
| Jrot. | Mass inertia moment | 42,42 | kgcm² |
| Idle torque at 0 stroke | 3,1 | Nm | |
Carriage
HIWIN toothed belt modules are available with three different carriage lengths depending on the size and dimensions of the load to be transported. In order to ensure ideal, reproducible alignment of the adjacent structure, each threaded hole has an additional bore hole via which the load capacity can be fixed with centring sleeves. The matching centring sleeves can be found in the accessories.
Drive adaptation
Thanks to its symmetrical design, the HIWIN toothed belt axis allows motors and gears to be mounted on all four sides of the drive blocks. Additional journals, which are available as accessories, can be used to position additional inputs and outputs at any point. You can find these in the accessories.
Cover strip
The steel cover strip prevents dirt and dust from entering the axis interior. In addition, the cover strip allows the axes to be used in areas with coarse, sharp-edged or hot foreign bodies. The magnetic strips integrated in the axis profile hold the belt securely in position and increase the sealing effect.
Toothed belt
The toothed belt with modern high performance profiles (HTD shape) and reinforced steel tension members enables high power transmission while offering high skip resistance.
Lubrication
For convenient maintenance of the linear axis, a separate grease nipple is fitted to the left and right of the carriage for each lubrication point. This ensures optimum accessibility for relubrication, even under difficult installation conditions. For further information on lubrication and maintenance, please refer to the assembly instructions.
| Name | Category | Product | Size | Language |
|---|---|---|---|---|
| Belt axes HM-B, HT-B, HB-B,HC-B, HD, HS | Assembly Instructions | Linear axes & linear axis systems | 11 MB | |
| Linear axes and axis systems HX | Catalogue | Linear axes & linear axis systems | 13 MB | |
| Linear axes HM, HT, HB, HD | Project planning sheet | Linear axes & linear axis systems | 285 KB |
HIWIN HX: One axis family – countless possibilities
An innovative design, two designs, three drive types and countless possibilities. The bendable HIWIN HX axis system offers the right solution for your ideas.
Installation of the limit switches and adjustment of the switching distance for HIWIN linear axes
The limit switches or additional reference switches are quick and easily to install in HIWIN linear axes, and positioning is continuously variable. The switching distance to the damping element can be set easily using a feeler gauge. We’ll show you how in this video. Tools/Equipment recommendation: - 6-edged offset screwdriver set, feeler gauge, scale, assembly instructions.
Cover strip change in a linear module HM-B
The cover strip can be changed quickly and easily in the HIWIN HM linear modules. We’ll show you how in this video. Tools/equipment recommendation: 6-edged offset screwdriver set, cut-resistant gloves, permanent marker, bracket, tin snips, lint-free cloth, assembly instructions.
Toothed belt change and belt tightener setting – HM-B and HT-B toothed belt axis
The toothed belt can be changed quickly and easily in the HIWIN linear modules HM-B and linear tables HT-B. We’ll show you how in this video. Tools/Equipment recommendation: 6-edged offset screwdriver set, circlip pliers, rubber hammer, tin snips, scale, belt tension meter.